Ultra Quiet CPU Cooler with Green LED
(recommended By nVidia)
Pure Copper heatsink with component layout optimized for maximum cooling
efficiency
1. Compatible with AMD Opteron, Athlon 64 X2 Dual-Core, Athlon
64 FX, Athlon 64, and Sempron for
Socket AM2/754/939/940.
2. Pure copper heatsink with component layout optimized for maximum cooling
efficiency.
3. Innovative, patented, and curved heatpipe design for a heat transfer capacity
of up to six heatpipes
with the use of just three.
4. Ultra slim fins (0.2mm) for minimized weight and reduced airflow resistance.
5. Adjustable fan speed controller (FAN MATE 2) included.
|
|
Socket |
CPU |
Silent Mode
(1,350~1,800rpm) |
Low-noise Mode
(1,800~2,600rpm) |
Compatible
Motherboard |
|
AMD |
AM2 |
Sempron |
Supports all speeds |
Supports all speeds |
see manufacture website |
|
Athlon 64 |
|
Athlon 64 X2 |
|
Athlon 64 FX-62 |
|
754 |
Sempron |
Supports all speeds |
Supports all speeds |
see manufacture website |
|
Athlon 64 |
|
939 |
Athlon 64 |
|
Athlon 64 X2 |
|
940 |
Athlon 64 FX |
|
Opteron |
Heatsink
|
Dimensions |
85(L) X 112(W) X 125(H)mm |
|
Weight |
530g |
|
Material |
Pure Copper |
|
Dissipation Area |
3,698cm2 |
|
Thermal Resistance |
Silent Mode |
0.16 ﹉C/W |
Low-noise Mode |
0.12 ﹉C/W |
|
|
|
Fan
|
Bearing Type |
2-Ball Bearing |
|
Speed |
Silent Mode |
1,350rpm▽ 10 % |
Low-noise Mode |
2,600rpmM ▽ 10 % |
|
Noise Level |
Silent Mode |
18.0dB ▽ 10% |
Low-noise Mode |
27.5dB ▽ 10% |
FAN Speed Controller (FAN MATE
2)
|
|
|
|
- Dimensions |
: 70(L) x 26(W) x 26(H)mm |
|
|
- Weight |
: 20g |
|
|
- Output Voltage |
: 5V ~ 11V ▽ 2% |
|
|
- Allowable Power |
: 6W or lower |
|
|
- Connector |
: 3-Pin |
|
|
|
Installation Requirements
Cases equipped with an Air Guide must have their Air Guide
Ducts removed before installation.
Install only on systems meeting the following conditions :
1) There must be no interfering components (e.g. PSU, VGA card) within 56mm
distance from the
center of the CPU.
2) There must be no interfering components (e.g. ODD) within 45mm distance from
the center of the
CPU.
3) Case chassis cover must be distanced at least 135mm away from the
motherboard.
Compontents:
1) CNPS9500 AM2
2) Thermal Grease
3) FAN MATE 2 (Fan Speed Controller)
4) Cable for FAN MATE2
5) Double-sided Tape(to attach FAN MATE2)
6) One(1) Clip
7) One(1) Lever
8) Users Manual
See additional information from Manufacture Site
