Zalman (CNPS8000) High Performance Quiet CPU Cooler- For Socket (AMD 754/939/940/AM2/Intel 775)- Intel Core 2 Duo Compatible, Low Profile

Heatsink

Fans:

Fan Speed Controller (Fan Mate 2)

• Dimensions:  70(L) x 26(W) x26(H)mm
• Weight: 20g
• Output Voltage: 5V ~ 11V ± 2%
• Allowable Power: 6W or lower
• Connector: 3-Pin
• Direction for Use

Compatible CPUs:

Note⁽¹⁾ The distance from the end of AM2 retention frame to RAM slot should be at least 18mm, or interference may occur. Please refer to the manual and the layout of the M/B for any possible interference and feasibility of creating Dual-Channel configuration

Cautionary Note:

• The computer system may automatically shut down when booting the computer after the system monitoring program outputs a warning stating that the CPU fan is rotating slowly. In such a case, fully turn the speed control knob in the clockwise direction before booting to disable the ‘CPU Fan Detected’ option in BIOS setting, or set the CPU fan’s rotational speed to less than or equal to 1300rpm in the system monitoring program.
• Zalman Tech Co., Ltd. is not responsible for any damages in CPU resulting from OVERCLOCKING.

Installation Requirements:

Components:

Common Components                                    Components for Intel Pentium D/Pentium4 (Socket 775)

1) One CNPS8000                                              7) Two Clips for Socket 775
2) One Thermal Grease                                       8) One Backplate for Socket 775     
3) One FAN MATE 2 (Fan Speed Controller)
4) One Cable for FAN MATE 2                             Components for AMD AMD64 (Socket 754/939/940)
5) One Double-sided Tape                                   9) One Clip-A for AMD64
    (for attaching FAN MATE 2)                            10) One Clip-B for AMD64
6) One User’s Manual